The Cathodic Delaminator is used for rapid checking of product quality and frequently quality control of coated metals. The apparatus consists of a control unit and a temperature control vessel (immersion container) with 8 test receptacles and circulator. Each test vessel has its own constant current source. So you can use up to 8 specimens for testing, independently of each other. The cathodic delamination allows the determination of infiltration of the coating in the damaged area and erroneous retreatments can be made visible (formation of bubbles during pinholes, scratches or stone impact).
Besides the usual applications such as salt spray test and cyclic corrosion tests (CCT), the specimens can be stored and tested in an atmosphere with controlled humidity. Constant settings, as well as rising and falling ramps for temperature and humidity can be programmed quickly and easily using a display with “Touch” function. The Model 618 is ideal for using fast ramps for temperatures or rel. humidity or for slowly increasing/ decreasing over several hours. An additional air conditioner allows the operator to carry out low-temperature cycles down to -40°C and dry heat up to +70°C. Possible test methods include: DIN EN ISO 6270-2 CH, DIN 50958, DIN 55991, ISO 11503, ASTM D2247, BS 3900 Part F2, DIN EN ISO 6270-2 AHT, DIN EN ISO 6270-2 AT, ASTM B117, D171058, ISO 9227, DIN EN ISO 9227 SS, DIN EN ISO 9227 ESS, DIN EN ISO 9227 CASS, P-VW 1210, VDA 233-102
Accelerated Weathering Instrument BANDOL WHEEL®H 532/II Photo-ageing instrument for acceleration of natural weathering
for “wet or dry” cycles. Accelerated Weathering Instrument. A reliable accelerated weathering instrument in a compact design for acceleration of natural weathering. BANDOL WHEEL® was developed for quick but natural weathering, similar to outdoor exposure. To complete the weathering cycle, a mask can be added in the equipment which permits the introduction of obscurity phases without switching off the light source. The samples get a nominal UV radiation level corresponding to about “2 suns”. This permits an important acceleration in weathering that, at the same time, still correlates with natural weathering.
Adaptable anti-slip grip made of aluminum with engraved grid pattern, with freely rotating as well as locked axis for constant force application. incl. clamping chuck adapter to attach the cross-cut single edge, the corrosion scratch tools acc. to van Laar and Clemen as well as many user-specific tools with shaft diameter up to 4mm flexible steel ruler plastic case (without test tip)