Author: christinanelson

BANDOL WHEEL® Model 532/II

Accelerated Weathering Instrument BANDOL WHEEL®H 532/II Photo-ageing instrument for acceleration of natural weathering
for “wet or dry” cycles.  Accelerated Weathering Instrument.  A reliable accelerated weathering instrument in a compact design for acceleration of natural weathering. BANDOL WHEEL® was developed for quick but natural weathering, similar to outdoor exposure. To complete the weathering cycle, a mask can be added in the equipment which permits the introduction of obscurity phases without switching off the light source. The samples get a nominal UV radiation level corresponding to about “2 suns”. This permits an important acceleration in weathering that, at the same time, still correlates with natural weathering.

VarioCut Model 404 with Multifunctional Handle

Adaptable anti-slip grip made of aluminum with engraved grid pattern, with freely rotating as well as locked axis for constant force application. incl. clamping chuck adapter to attach the cross-cut single edge, the corrosion scratch tools acc. to van Laar and Clemen as well as many user-specific tools with shaft diameter up to 4mm flexible steel ruler plastic case (without test tip)

Hydraulic Load Cells Models 830-833-844

Hydraulic load cells are mainly used in static applications. The increased force time (referred to the rated load) should remain constant for at least 1 second. Continuous rapid changes in force may destroy the pressure gauge. It can however be protected against shock loads arising when the load is applied or removed by means of appropriate throttles. All load cells are made of stainless steel.

Display Instrument 975AP

Instrument for force measurement in connection with DMS force transducers, including integrated mains supply.

Model 922 Electric Load Cell

These force measuring devices are suitable for universal applications, namely wherever tensile and pressure forces need to be measured with a high degree of accuracy, e.g. in materials testing (Erichsen Tensile Testing Machines UNIMAT® and UNIMAT® + UNICONTROL ®), in reference measuring equipment and in research and development. For industrial purposes too, these force transducers are ideal in the fields of automation, controlling press-in processes and in jointing technology.  An extensive accessories program is available. A connection to the Measuring and Display Instruments 975 AP, 980 AP and PHYSIMETER 906 MC is also possible by means of an adapter plug.    Measuring range 5kN to 1000kN available.

PHYSIMETER 906 USB

The Measuring System PHYSIMETER 906 USB is used for the acquisition of mechanical parameters based on wire strain gauge sensors. The ergonomically designed housing made of anodized, high-strength aluminum, is provided with threaded bores at the front side so that an unproblematic connection to the ERICHSEN testing machines is guaranteed – as it was also the case with the preceding models of tensile and pressure measuring devices. As an option a calibration according to VDI/VDE 2624 sheet 2.1 – Measurement of mechanical quantities – Instructions for calibration of mobile force measurement systems – is available.  With integrated or external force sensor and USB interface.