Simple and low cost test apparatus for continuous salt spray and condensation water testing. The test chamber with a volume of 400 l and all electric and pneumatic components to operate and control the test cycle are incorporated into a compact rectangular cabinet of plastic material. Complete, with specimen holders, storage tank for 90 l salt solution, pressure gauge and LCD for the temperature regulator and test time counter.
For tests in accordance with all salt spray standards. Corrosion resisting test chamber with circular dome or rectangular chamber, of plastic construction. Special dimensions upon request. Operator friendly controls for up to 2 test chambers with volumes of 400 l and/or 1000 l.
Compact instruments to determine the resistance to exposure to sun light using a Xenon high pressure lamp (1500 W or 2500 W). Adjustable levels of irradiance, uniform illumination by special mirror system, exchangeable filters for variable UV fraction. Programmable flooding system for periodic wetting of specimens available.
Corrosion test apparatus for standardized tests in condensation water climate with or without SO2 addition. The functions “heating”, “gas dosing”, “draining” and “venting” are controlled by a programmable timer.
Inexpensive apparatus for testing the corrosion resistance of specimens in condensation water climate with or without SO2 addition in accordance with different standards. Robust 300 l plastic chamber with front door loading. A larger version with 1000 l test chamber volume can be supplied in special design.
A pinhole detector for finding flaws and porous areas in insulating coatings such as paint, plastic and enamel on electrically conducting substrates. Portable instrument, battery operated. Two different versions for standardized direct or pulsed voltage tests, with 2 and 3 high voltage probes, respectively, within a range up to 35 kV. Max. layer thickness 8 mm. Special accessories for particular applications.
The TINT TESTER 527, has been developed especially for brightness measurement of dark, uncured coatings such as paste pigment applications on flat surfaces, to determine the tinting strength according to ASTM D 3265 and ASTM D 2745. Besides this special application, the instrument can also be used as a standard reflection photometer to measure the brightness of solid substrates (coatings, paper, plastics, etc.) according to ASTM E 97.
Three measuring geometries in one portable instrument: 20º, 60º and 85º. With data storage and statistical functions as well as interface for data transfer to PC. Battery operated instrument.
Microcontroller-operated instrument mainly intended for the determination of the washing and scrubbing resistance as well as cleanability of dispersion paints (specifically ”wall paints”)., The wide range of its adjustable parameters allows also some further tailored/customized testing matters (for example for testing cleaning agents/solutions, etc.) as well. In the above standard applications a matt black PVC foil will be coated, and – if required – soiled in a defined manner. After clamping into the device it will be exposed under the influence of a washing liquid the stress of the moving scrub body.
Internationally established abrasion test instrument. Standardized tests for 8 plastics decorative coatings, paints etc. Suitable for abrasion simulation of all types by applying appropriate abrading wheels and the use of a wide range of accessories.