UNIMAT BASIC 054 Tensile & Pressure Testing Machine

We recommend our serie UNIMAT® BASIC 054 testing machines for testing either hard and tough or soft specimens. These tensile testing machines are equipped with two columns and two recirculating ball screws which guide the travelling cross-arm. The upper fixed cross-arm and the base plate in conjunction with the travelling cross-arm between the two from two separate working areas.  Available in 10 kN and 20kN ranges.

UNIMAT BASIC 052 Tensile & Pressure Testing Machine

We recommend our serie UNIMAT® PLUS 052 testing machines for testing either hard and tough or soft specimens. These tensile testing machines are equipped with two columns and two recirculating ball screws which guide the travelling cross-arm. The upper fixed cross-arm and the base plate in conjunction with the travelling cross-arm between the two from two separate working areas.   Range 5kN.

UNIMAT BASIC 050 Tensile & Pressure Testing Machine

The desktop model of the 050 series is small in dimension and require only a minimum of space. The spindle-driven cross-arm runs through two supports which are arranged behind each other and connected at the top by a fixed cross-arm. The lower part of the supports joins a base plate which forms the upper element of a sturdy sheet metal casing. The Model 050 has an electric drive by speedcontrolled DC motor and recirculating ball screw.  Range 2kN.

UNIMAT 050 & 052 Tensile & Pressure Testing Machine

The desktop models of the 050 series are small in dimension and require only a minimum of space. The spindle-driven cross-arm runs through two supports which are arranged behind each other and connected at the top by a fixed cross-arm. The lower part of the supports joins a base plate which forms the upper element of a sturdy sheet metal casing.  Two different basic versions are available: Model 050 M The desktop models of the 050 series are small in dimension and require only a minimum of space. The spindle-driven cross-arm runs through two supports  which are arranged behind each other and connected at the top by a fixed cross-arm. The lower part of the supports joins a base plate which forms the upper element of a sturdy sheet metal casing. Two different basic versions are available: Model 050 M with manual drive by crank handle and irreversible trapezoidal spindle Model 050 with electric drive by speed-controlled DC motor and recirculating ball screw to allow precise regulation.  Available in range of 2kN or 5kN.